Products
-
Aluminum premium surface mounted cabinet door straightener
Model DS1101 and DS1102 are premium surface mounted cabinet door straighteners that integrated with handles, the handle is inserted with a brown leather strip for a beautiful aesthetic effect of mix of hard metal and soft leather. They need to be inserted into a groove in the front of the door and installed before the door is warped.
-
Aluminum cabinet door straightener with handle
Model DS1103 is a surface mounted cabinet door straighteners that integrated with handles. The straightener needs to be inserted into a groove in the front of the door and installed before the door is warped.
-
Aluminum VF type surface mounted cabinet door straightener
Model DS1201 and DS1202 are VF type surface mounted cabinet door straighteners. The straighteners need to be inserted into a groove in the back of the door and installed before the door is warped.
-
Mini VF type surface mounted door straightener
Model DS1203 is a mini VF type surface mounted straighteners specially for thin cabinet door at 15mm to 20mm. The straightener need to be inserted into a groove in the back of the door and installed before the door is warped.
-
Aluminum recessed cabinet door straightener
Model DS1301 is a Recessed door straightener which make the adjustment to the door panel in the middle of the straightener. Model 1301 door straightener made of high quality anodized aluminum house with heavy duty steel rod inside and moulded plastic based in both ends.
-
Aluminum concealed Cabinet door straightener
Model DS1302 and DS1303 are Concealed door straighteners which come with a standard dual adjustment system from the top or bottom, allowing you to choose from which side to make the adjustment during door assembly at all stages.
-
External Corner Profiles
Innomax offers a variety of profiles to protect and finish external corners and edges in ceramic wall coverings, designing them specifically to suit multiple design and interior decoration requirements. These products are a striking combination of form and matter: the external profiles made of high quality aluminium and are also available in square, L, triangle and round shapes, in different heights to suit any technical or decorative requirements. Innomax also supplies external corner profiles that can be fixed to existing surfaces or wall coverings, and some are self-adhesive to assure quick and easy installation. Innomax also produces a dedicated range of external corner profiles for work tops and tiled kitchens.
-
Listello Tile Trim and Decorative profiles
Listello tile trims and decorative profiles are among the details that make a difference, bringing light and elegance to any covering. Through their presence, these finishing elements can transform and embellish the room they are added to.
The range of listello tile trims by Innomax offers multiple finishes, to be adapted to create infinite aesthetic combinations and furnishing styles, from classic to modern. These solutions can be used in any space, from the kitchen to the bathroom, living room or large commercial space. In particular, Model T2100 is a range of listello tile trims designed to create interesting aesthetic effects on ceramic tile coverings. They are available in different materials and colour finishes.
-
Durable Materials Aluminium Internal Corner Profiles
Innomax offers multiple solutions for customers wishing to eliminate right angles between floor and wall. Internal corner profiles by Innomax were specifically designed for this purpose and can be used on both new and existing floors – they are ideal for all spaces, both public and private, in which hygiene is a priority. For example hospitals, food plants, beauty spas, swimming pools and commercial kitchens. Internal corner profiles by Innomax are made of durable materials that are easy to clean, like aluminium. Furthermore, their design meets European health and hygiene regulations which require all 90-degree angles in which dirt and bacteria can build up to be eliminated. Internal corner profiles by Innomax are therefore an ideal solution for all spaces in which high hygienic standards must be maintained.
Model T3100 is a range of external corner profiles in aluminium, designed to an edge between a covering and floor, or as a perimeter joint. The distinctive cross section of this range facilitates expansion at the corner joint between the two surfaces. The profiles are easy to fit and mean silicone is no longer needed as a sealant, which is a benefit in both aesthetic and hygienic terms: the absence of a layer of silicone stops dirt and bacteria from building up.
-
Profiles for floors with equal height
Joining surfaces and different materials with elegance and linearity: this is the main task of profiles for floors of equal height.
To fulfil this requirement, INNOMAX has created a wide range of solutions which, first and foremost, can be used as a decorative element and joint between surfaces in different materials: from ceramic tile floors to parquet, as well as carpeting, marble and granite. They do all this while guaranteeing excellent visual appeal and integrating seamlessly with the floor.
Another value added characteristic of profiles for floors of equal height is resistance: these profiles were designed to withstand the passage of high and frequent loads. The profiles can also be used to cover any imperfections in the surface resulting from the cutting and laying of different floor coverings, or to “correct” small differences in floor height.
Model T4100 is a range of aluminum profiles to seal, finish, protect and decorate level tiled, marble, granite or wooden floors, and to uncouple floors of different materials. T4100 is ideal to finish and protect the corners of steps, platforms and worktops, and also as a perimeter profile to contain doormats. It can be also used as an external corner profile to seal and protect the external corners and edges of tiled coverings
-
Profiles for Floors with Different Heights
The profiles for floors of different heights have a sloping edge and can be used to join floors of different thicknesses. The wide range of products that Innomax provides means customers can always find the right solution for a specific application space.
In addition to fulfilling a specific functional requirement as a joint, these profiles bring an important aesthetic touch and can be used to decorate and finish interiors with elegance and originality.
Depending on the composition, they can withstand heavy stress, resist shock or simply provide a smoother passage by removing steps and differences in height. The different combinations of shape and material mean there are profiles for any type of floor, from wood to carpet. There are also a variety of application methods, ranging from adhesive bonding to screws, also on existing floors.
Model T5100 series is the ideal solution for joining existing floors of low thickness. The anodized aluminum profiles quickly eliminate any unsightly height differences, from 4mm to 6mm, and also come in blister packs (with adhesive or screws); these characteristics assure they are easy to apply and also ideal for DIY use.
-
Profiles for wood and laminated floors
To meet the needs of anyone laying wood or laminate floors, Innomax has designed a wide range of specific profiles. The range provided is extensive and diverse, offering professional, customisable and tailored solutions. The products come in a variety of anodised aluminium and wood grains finishes. Further customizations are possible using wood grains heat transfer to easily and effectively combine the selected profile or skirting board to the floor. The wide range of products includes threshold profiles for floors of equal and different heights, edging profiles, stair nosings, profiles to separate, protect and decorate floors in the same or different materials, and skirting boards. In addition to their decorative role, Innomax elements offer practical solutions to finish and appropriately protect floating or bonded wood and laminate surfaces
Model T6100 series is a range of end trims for floating wood and laminate floors, designed to allow the necessary expansion. These profiles can be selected in the anodised aluminium version or in natural aluminium coated with wood grains coatings, to meet any aesthetic requirement. The T6100 range is also available in the Flexible version, to assure the profile matches or can be adapted to specific curvatures of floors which are not straight.